Product Information
Product Overview
The UDA1330ATS/N2,112 is a single-chip 20-bit stereo Digital-to-analog Converter (DAC) employing bit stream conversion techniques. The UDA1330ATS supports the I²S-bus data format with word lengths of up to 20-bit, the MSB-justified data format with word lengths of up to 20-bit and the LSB-justified serial data format with word lengths. The UDA1330ATS can be used in two modes - L3 mode or the static pin mode. In the L3 mode, all digital sound processing features must be controlled via the L3 interface, including the selection of the system clock setting. In the two static modes, the UDA1330ATS can be operated in the 256fs and 384fs system clock mode. Muting, de-emphasis for 44.1KHz and four digital input formats can be selected via static pins. The L3 interface cannot be used in this application mode, so volume control is not available in this mode.
- Low power consumption
- Selectable control via L3 microcontroller interface or via static pin control
- Integrated digital filter plus non inverting
- No analog post filtering required for DAC
- TTL tolerant input pads
- Pin and function compatible with the UDA1320ATS
- Multiple format input interface
- 1fs Input format data rate
- DAC digital sound processing
- Advanced audio configuration
- Stereo line output
- High linearity, wide dynamic range and low distortion
Technical Specifications
20bit
Serial
SSOP
-
85°C
-
55kSPS
2.7V to 5.5V
16Pins
-40°C
-
Technical Docs (1)
Legislation and Environmental
Country in which last significant manufacturing process was carried outCountry of Origin:Thailand
Country in which last significant manufacturing process was carried out
RoHS
RoHS
Product Compliance Certificate