MAX319CSA+T

The MAX319CSA+T is a precision, CMOS analogue switch in 8 pin NSOIC package. The MAX319CSA+T offer low on-resistance to match within 2ohm between channels and to remain flat over the analogue signal range (Δ3ohm max). It offers low leakage (less than 250pA at +25°C and less than 6nA at +85°C) and fast switching (turn-on time less than 175ns and turn-off time less than 145ns). This device has extremely low charge injection, low power consumption and electrostatic discharge (ESD) greater than ±2000V. The 44V maximum breakdown voltage allows rail to rail analogue signal handling capability. Typical applications include sample and hold circuits, guidance and control systems, heads-up displays, military radios, battery powered systems, PBX and PABX.

• Supply voltage range is 10V to 30V, ±4.5V to ±20V
• Operating temperature range from 0°C to 70°C
• One normally open(NO) and one normally closed(NC) switch
• TTL/CMOS logic compatible
• Rail to rail analogue signal handling capability
• Charge injection is less than 10pC
• Low power consumption of 35μW
• Low on resistance is less than 35ohm
• Battery-Powered Applications; Communication Systems; Guidance and Control Systems;
• Heads-Up Displays; Military Radios; PBX, PABX; Sample-and-Hold Circuits; Test Equipment

Applications

Signal Processing, Communications & Networking, Portable Devices

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party