You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Product may not be an exact match for your search
You previously purchased this product.
View in Order History
RPI-COMPUTE3-KIT
Development Kit, Raspberry Pi Compute Module 3, SOM I/O Board, All Necessary Interface Ports
- Manufacturer:
- RASPBERRY-PI RASPBERRY-PI
- Manufacturer Part No:
- RPI-COMPUTE3-KIT
- Order Code:
- 2675719
- Product Range
- Raspberry Pi Compute Module 3
- Technical Datasheet:
- RPI-COMPUTE3-KIT Datasheet
Product Range Selector (Raspberry Pi Compute Module 3)
See all from this product rangeAlternatives for RPI-COMPUTE3-KIT
Product Information
Want to see similar products? Simply select your required attributes below and hit the button ×
- :
- Broadcom
- :
- 32bit
- :
- BCM2xxx
- :
- ARM
- :
- Cortex-A53
- :
- BCM2837
- :
- RPi Compute Module 3 & IO Board, Camera & Display Adaptor Board, FFC & USB Cables, Jumper Wires
- :
- Raspberry Pi Compute Module 3
Technical Documents (4)
CAD Downloads
--Please select...
✔
--Please select...
×
Terms and Conditions
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Product Overview
This is the main development kit I/O board into which the Compute Module SODIMM board is connected. It also contains all of the necessary interface ports to allow an engineer to design and test their own prototype application. The modules simplify the design process engineers need to undertake when developing a System on Module (SoM) solution into their final product. Engineers do not need to concern themselves with the complexities of interfacing with the BCM2837 processor directly and instead can concentrate on designing the interfaces to their own I/O board and their application software . This simplicity fosters rapid development. A Raspberry Pi Compute Module I/O Board Camera Display Adaptor is included in the kit to connect a standard Raspberry Pi camera board or Raspberry Pi display to the Compute Module I/O Board.
- Multiple GPIO interfaces on 2 60 way 0.1" Headers
- 2 x CSI ports for camera boards
- 2 x DSI ports for display boards
- Full size HDMI port
- Micro USB power connector
- Micro SD connector
- SOFTWARE - ARMv7 Instruction Set and a mature and stable Linux software stack
Contents
Raspberry Pi compute module I/O board, Raspberry Pi compute module 3, Raspberry Pi compute module 3 lite , Raspberry Pi compute module I/O board camera display adaptor, 5V 2.5A power supply, USB A to micro B cable and 4 x jumper wires.
Contact Sales for a quote
Due to market conditions delivery times are for general guidance only and may be subject to change at short notice
- Price for:
- Each
Multiple: 1 Minimum: 1
| Quantity | Price (ex VAT) (inc VAT) | Your Price (ex VAT) |
|---|---|---|
| 1+ | £76.62 £91.94 | |
| 10+ | £74.70 £89.64 | |
| 100+ | £72.78 £87.34 | |
Pricing is unavailable. Please contact customer services.
Total Price: ( ex VAT )
Total Price: ( inc VAT )
Total Price: --
Filter Tool