You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Product may not be an exact match for your search
You previously purchased this product.
View in Order History
TLC59116IPWR .
Led Driver, 16 Outputs, Constant Current, 4V-4V in, 1MHz switch, 17V/120mA out, TSSOP-28
- Manufacturer:
- TEXAS INSTRUMENTS TEXAS INSTRUMENTS
- Manufacturer Part No:
- TLC59116IPWR .
- Order Code:
- 1647815RL
Alternatives for TLC59116IPWR .
Product Information
Want to see similar products? Simply select your required attributes below and hit the button ×
- :
- Constant Current
- :
- 3V
- :
- 5.5V
- :
- 17V
- :
- 120mA
- :
- 1MHz
- :
- 16Outputs
- :
- SMD
- :
- TSSOP
- :
- 28Pins
- :
- -40°C
- :
- 85°C
- :
- -
- :
- -
- :
- MSL 1 - Unlimited
Technical Docs (1)
CAD Downloads
--Please select...
✔
--Please select...
×
Terms and Conditions
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Product Overview
The TLC59116IPWR is a 16bit fast mode plus (FM+) I2C bus constant current LED sink driver in 28 pin TSSOP package. It is optimized for red/green/blue/amber (RGBA) colour mixing and backlight application. Each LED output has its own 8bit resolution (256 steps) fixed frequency individual PWM controller that operates at 97KHz with a duty cycle that is adjustable from 0% to 99.6%. The individual PWM controller allows each LED to be set to a specific brightness value. An additional 8bit resolution (256 steps) group PWM controller has both fixed frequency of 190Hz and adjustable frequency between 24Hz to once every 10.73seconds with a duty cycle that is adjustable from 0% to 99.6%. The group PWM controller dims or blinks all LEDs with same value. Each LED output can be off, on (no PWM control) or set at its individual PWM controller value at both individual and group PWM controller values.
- Constant output current range from 5mA to 120mA
- Maximum output voltage of 17V
- 16 constant current output channels
- 3.3V or 5V supply voltage
- Four hardware address pins allow 14 TLC59116 devices to be connected to same I2C bus
- 1MHz fast mode plus (FMT) compatible I2C bus interface with 30mA high drive capability
- Internal power on reset, no glitch on power up
- Noise filter on SCL and SDA inputs
- Open load and overtemperature detection mode to detect individual LED errors
- Operating temperature range -40°C to 85°C
Applications
LED Lighting, Industrial
Packaging type
Re-reel
A £3.50 re-reeling charge will be added for this product"
No Longer Stocked
- Price for:
- Each (Supplied on Cut Tape)
Multiple: 1 Minimum: 10
| Quantity | Price (ex VAT) (inc VAT) | Your Price (ex VAT) |
|---|---|---|
| 1+ | £1.62 £1.944 | |
| 25+ | £1.61 £1.932 | |
| 50+ | £1.45 £1.740 | |
Pricing is unavailable. Please contact customer services.
Total Price: ( ex VAT )
Total Price: ( inc VAT )
Total Price: --
Filter Tool