Low

L293NE. - 

Half Bridge IC, 4.5V-36V Supply, 2A Out, 400ns Delay, DIP-16

TEXAS INSTRUMENTS L293NE.

Image is for illustrative purposes only. Please refer to product description.

Manufacturer Part No:
L293NE.
Order Code:
1564967
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
400ns
:
0°C
:
2A
:
800ns
:
DIP
:
70°C
:
16Pins
:
-
:
-
:
4.5V
:
Each
:
36V
:
-
:
MSL 1 - Unlimited
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The L293NE is a quadruple high current half H driver in 16 pin DIP package. This driver is designed to drive inductive loads such as relays, solenoids, DC and bipolar stepping motors as well as other high current/high voltage loads in positive supply applications. All inputs are TTL compatible. Each output is a complete totem pole drive circuit with darlington transistor sink and pseudo darlington source. Drivers are enabled in pairs with drivers 1 and 2 enabled by pin 1, 2 and drivers 3 and 4 enabled by pin 3, 4. When an enable input is high, the associated drivers are enabled and their outputs are active and in phase with their inputs. When an enable input is low, those drivers are disabled and their outputs are off and in high impedance state. With proper data inputs each pair of drivers forms a full-H (or bridge) reversible drive. External high speed output clamp diodes should be used for inductive transient suppression.
  • Wide supply voltage range from 4.5V to 36V
  • Separate input logic supply
  • Internal ESD protection
  • Thermal shutdown
  • High noise immunity inputs
  • Functional replacements for SGS L293 and SGS L293D
  • Output current is 1A per channel
  • Peak output current is 2A per channel
  • Operating temperature range 0°C to 70°C

Applications

Motor Drive & Control

Alternatives

Associated Products

Compare Selected