Low

L293DNE - 

Motor Driver/Controller, Half-H, 4.5V to 36V supply, 36V/600 mA/4 Outputs, DIP-16

Image is for illustrative purposes only. Please refer to product description.

Manufacturer Part No:
L293DNE
Order Code:
1470423
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
Half-H
:
0°C
:
1.2A
:
4Outputs
:
DIP
:
70°C
:
16Pins
:
39V
:
-
:
-
:
4.5V
:
Each
:
36V
:
-
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The L293DNE is a quadruple high current half-H driver. The L293DNE is designed to provide bidirectional drive currents of up to 600mA at voltages from 4.5V to 36V. The device is designed to drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high current/high voltage loads in positive supply applications. All inputs are TTL compatible. Each output is a complete totem pole drive circuit, with a Darlington transistor sink and a pseudo-Darlington source. Drivers are enabled in pairs, with drivers 1 and 2 enabled by 1,2EN and drivers 3 and 4 enabled by 3,4EN. When an enable input is high, the associated drivers are enabled and their outputs are active and in phase with their inputs. When the enable input is low, those drivers are disabled and their outputs are off and in the high impedance state. With the proper data inputs, each pair of drivers forms a full-H (or bridge) reversible drive suitable for solenoid or motor applications.
  • Separate Input logic Supply
  • Internal ESD Protection
  • Thermal Shutdown
  • High noise immunity inputs
  • Output current 600mA per channel
  • Output clamp diodes for inductive transient suppression

Applications

Industrial, Motor Drive & Control, Power Management

Alternatives

Compare Selected
Manufacturer Part Number
Order Code
Manufacturer / Description
Avail
Price For
Quantity

Associated Products