Low

STM32F427IGT6 - 

ARM Microcontroller, High Performance, ARM Cortex-M4, 32bit, 180 MHz, 1 MB, 256 KB, 176 Pins

STMICROELECTRONICS STM32F427IGT6

Image is for illustrative purposes only. Please refer to product description.

Manufacturer Part No:
STM32F427IGT6
Order Code:
2333366
Product Range
STM32 F4 ARM Cortex-M4 Microcontrollers

Product Information

:
CAN, I2C, SPI, UART, USART, USB
:
140I/O's
:
32bit
:
1MB
:
ARM Cortex-M4
:
176Pins
:
STM32 F4 ARM Cortex-M4 Microcontrollers
:
180MHz
:
1.8V
:
LQFP
:
Each
:
3.6V
:
256KB
:
MSL 3 - 168 hours
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The STM32F427IGT6 is a STM32 F4 series 32-bit Microcontroller based on the high-performance ARM Cortex-M4 RISC core operating at a frequency of up to 180MHz. Its Cortex-M4 core features a FPU single precision which supports all ARM single precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security. The device incorporate high-speed embedded memories (up to 1024kB of Flash memory, up to 256kB of SRAM), up to 4kB of backup SRAM and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix. This device offer three 12-bit ADC, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timer for motor control, two general-purpose 32-bit timers, a true RNG, as well as standard communication interfaces up to three I²Cs, six SPIs, two I²Ss, four USARTs and four UART.
  • 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)
  • LCD parallel interface, 8080/6800 modes
  • LCD-TFT controller up to XGA resolution with dedicated Chrom-ART Accelerator™
  • 4 to 26MHz Crystal oscillator
  • Internal 16MHz factory-trimmed RC (1% accuracy)
  • 32kHz Oscillator for RTC with calibration
  • Internal 32kHz RC with calibration
  • Sleep, stop and standby modes
  • VBAT supply for RTC, 20x32 -bits backup registers + optional 4kB backup SRAM
  • 16-stream DMA Controller with FIFOs and burst support
  • SWD and JTAG interfaces
  • Cortex-M4 Trace Macrocell™
  • 1 x SAI (serial audio interface)
  • 2 x CAN (2.0B Active) and SDIO interface
  • USB 2.0 full speed device/host/OTG controller with on-chip PHY
  • USB 2.0 high-speed/full-speed device/host/OTG controller
  • 10/100 Ethernet MAC with dedicated DMA - supports IEEE 1588v2 hardware, MII/RMII
  • 8 to 14-bit parallel camera interface up to 54Mbps
  • True random number generator
  • CRC calculation unit

Applications

Motor Drive & Control, Automation & Process Control, Medical, Consumer Electronics, Power Management, Security, Imaging, Video & Vision, HVAC, Audio