Low

STM32F207IGT6 - 

ARM Microcontroller, Ethernet MAC, Camera Interface, ARM Cortex-M3, 32bit, 120 MHz, 1 MB, 128 KB

STMICROELECTRONICS STM32F207IGT6

Image is for illustrative purposes only. Please refer to product description.

Manufacturer Part No:
STM32F207IGT6
Order Code:
2333225
Product Range
STM32 F2 ARM Cortex-M3 Microcontrollers
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
CAN, I2C, SPI, UART, USART, USB
:
140I/O's
:
32bit
:
1MB
:
ARM Cortex-M3
:
176Pins
:
STM32 F2 ARM Cortex-M3 Microcontrollers
:
120MHz
:
1.8V
:
LQFP
:
Each
:
3.6V
:
128KB
:
MSL 3 - 168 hours
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The STM32F207IGT6 is a STM32 F2 series 32-bit Microcontroller based on the high performance ARM Cortex-M3 RISC core operating at a frequency of up to 120MHz. The device incorporates high-speed embedded memories (Flash memory up to 1MB, up to 128kB of system SRAM), up to 4kB of backup SRAM and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix. The devices also feature an adaptive real-time memory accelerator (ART Accelerator™) which allows to achieve a performance equivalent to 0 wait state program execution from Flash memory at a CPU frequency up to 120MHz. This performance has been validated using the CoreMark benchmark. The device offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers. a true number random generator (RNG).
  • 150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)
  • LCD parallel interface, 8080/6800 modes
  • 4 to 26MHz Crystal oscillator
  • Internal 16MHz factory-trimmed RC
  • 32kHz Oscillator for RTC with calibration
  • Internal 32kHz RC with calibration
  • Sleep, stop and standby modes
  • VBAT supply for RTC, 20 x 32-bit backup registers and optional 4kB backup SRAM
  • Debug mode - Serial wire debug (SWD), JTAG and Cortex-M3 embedded trace macrocell™
  • 2 x CAN interfaces (2.0B Active)
  • SDIO interface
  • USB 2.0 full speed device/host/OTG controller with on-chip PHY
  • USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip PHY and ULPI
  • 10/100 Ethernet MAC with dedicated DMA - supports IEEE 1588v2 hardware, MII/RMII
  • 8 to 14-bit Parallel camera interface (48MB maximum)
  • CRC calculation unit
  • 96-bit Unique ID

Applications

Motor Drive & Control, Medical, Industrial, Automation & Process Control, Consumer Electronics, Imaging, Video & Vision, Security, Audio, HVAC, Power Management

Associated Products