Low

LTM4641IY#PBF - 

DC/DC POL Converter, Adjustable, Buck, 660 kHz, 600 mV to 6 V out, 10 A, BGA-144

LINEAR TECHNOLOGY LTM4641IY#PBF

Image is for illustrative purposes only. Please refer to product description.

Manufacturer Part No:
LTM4641IY#PBF
Order Code:
2293137
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
38V
:
10A
:
125°C
:
144Pins
:
6V
:
600mV
:
4.5V
:
-
:
Buck (Step Down)
:
BGA
:
660kHz
:
Cut Tape
:
1 Output
:
MSL 1 - Unlimited
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The LTM4641IY#PBF is a switch mode step-down DC/DC µModule® Regulator with advanced input and load protection features. Trip detection thresholds for the following faults are customizable - input undervoltage, over temperature, input overvoltage and output overvoltage. Select fault conditions can be set for latch-OFF or hysteretic restart response or disabled. Includes he switching controller and house-keeping ICs, power MOSFETs, inductor, overvoltage drivers, biasing circuitry and supporting components. Operating from input voltages of 4 to 38V, the device supports output voltages from 0.6 to 6V, set by an external resistor network remote sensing the point-of-load voltage. The LTM4641 high efficiency design can deliver up to 10A continuous current with a few input and output capacitors. The regulator constant on-time current mode control architecture enables high step-down ratios and fast response to transient line and load changes.
  • Differential remote sense amplifier for POL regulation
  • Internal temperature, analog indicator output
  • Overcurrent foldback and over temperature protection
  • Current mode control/fast transient response
  • Parallelable for higher output current
  • Selectable pulse-skipping operation
  • Soft-start/voltage tracking/pre-bias start-up
  • UVLO, Overvoltage shutdown and latch-OFF thresholds
  • N-Channel overvoltage crowbar/power-interrupt MOSFET driver
  • Surge stopper capable with few external components
  • Robust, resettable latch-OFF overvoltage protection
  • ±1.5% Total DC output voltage error

Applications

Consumer Electronics, Avionics, Industrial

Associated Products