Low

LTC1052CN8#PBF - 

Operational Amplifier, Single, 1 Amplifier, 1.2 MHz, 4 V/µs, 4.75V to 16V, DIP, 8 Pins

LINEAR TECHNOLOGY LTC1052CN8#PBF

Image is for illustrative purposes only. Please refer to product description.

Manufacturer Part No:
LTC1052CN8#PBF
Order Code:
1663594
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
DIP
:
-40°C
:
4.75V to 16V
:
85°C
:
1 Amplifier
:
8Pins
:
-
:
-
:
4V/µs
:
Each
:
1.2MHz
:
-
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The LTC1052CN8#PBF is a low noise zero-drift Operational Amplifier for use with strain gauge amplifiers. Chopper-stabilization constantly corrects offset voltage errors. Both initial offset and changes in the offset due to time, temperature and common mode voltage are corrected. This, coupled with picoampere input currents, gives these amplifiers unmatched performance. Low frequency (1/f) noise is also improved by the chopping technique. Instead of increasing continuously at a 3dB/octave rate, the internal chopping causes noise to decrease at low frequencies. The chopper circuitry is entirely internal and completely transparent to the user. Only two external capacitors are required to alternately sample-and-hold the offset correction voltage and the amplified input signal. Control circuitry is brought out on the 14-pin and 16-pin versions to allow the sampling of the LTC1052 to be synchronized with an external frequency source.
  • 5µV Guaranteed maximum offset
  • 0.05µV/°C Guaranteed maximum offset drift
  • 0.01µV/°C Typical offset drift
  • 100nV/√Month Excellent long term stability
  • 30pA Guaranteed maximum input bias current
  • External capacitors can be returned to V- with no noise degradation

Applications

Sensing & Instrumentation, Signal Processing