Low

LT3680EMSE#PBF - 

DC-DC Switching Buck (Step Down) Regulator, Adjustable, 3.6V-36Vin, 790mV-30Vout, 3.5Aout, MSOP-10

LINEAR TECHNOLOGY LT3680EMSE#PBF

Image is for illustrative purposes only. Please refer to product description.

Manufacturer Part No:
LT3680EMSE#PBF
Order Code:
1432697
Technical Datasheet:
(EN)
See all Technical Docs

Product Information

:
36V
:
3.5A
:
1Outputs
:
125°C
:
10Pins
:
30V
:
790mV
:
3.6V
:
-
:
Buck (Step Down)
:
-
:
MSOP
:
2.4MHz
:
Cut Tape
:
MSL 1 - Unlimited
Find similar products Choose and modify the attributes above to find similar products.

Product Overview

The LT3680EMSE#PBF is an Adjustable 2.4MHz Step-Down Monolithic Switching Regulator with 75µA quiescent current that accepts input voltages up to 36V. A high efficiency 95mR switch is included on the die along with a boost Schottky diode and the necessary oscillator, control and logic circuitry. Current mode topology is used for fast transient response and good loop stability. Low ripple Burst Mode® operation maintains high efficiency at low output currents while keeping output ripple below 15mV in a typical application. In addition, the LT3680 can further enhance low output current efficiency by drawing bias current from the output when VOUT is above 3V. Shutdown reduces input supply current to less than 1µA while a resistor and capacitor on the RUN/SS pin provide a controlled output voltage ramp (soft-start). A power good flag signals when VOUT reaches 91% of the programmed output voltage.
  • Low ripple (<15mVP-P) Burst Mode® operation (IQ = 75µA at 12VIN to 3.3VOUT)
  • 200kHz to 2.4MHz Adjustable switching frequency
  • Low shutdown current (IQ <0.5µA)
  • Integrated boost diode
  • Synchronizable between 250kHz to 2MHz
  • Power good flag
  • Saturating switch design (95mR on-resistance)
  • 0.790V Feedback reference voltage
  • Thermal protection
  • Soft-start capability

Applications

Automotive, Portable Devices, Power Management, Industrial

Alternatives

Associated Products