FTDI  UMFT234XD-NC  USB Interface, FT234XD, UART, USB, 3.3 V

Technical Data Sheet (531.21KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.


Product Overview

The UMFT234XD-NC is a Breakout Module utilizes FTDI's FT234XDIC to convert USB to UART. The breakout module is a breakout board that converts USB 2.0 full-speed to UART. This module do not have a USB connector, instead, the modules plug directly into the USB host connector and the pads of the PCB makes electrical contact with the electrical contacts of the USB connector. The UART interface operates at +3.3V voltage levels, however all I/Os are 5V tolerant. The Breakout modules provide the simplest development hardware for the FT-X series of devices. To reduce cost the USB interconnect is simply tracking on the PCB which plugs directly into the USB host socket. The interface connector is a standard 0.1-inch pitch socket. The module is ready to use when plugged in to enable instant development work to begin.
  • USB to UART with four control bus lines
  • 3.3V power out limited to 50mA and 5V with as safety fuse
  • UART signals available via 8 pads on PCB
  • Supports for FT234XD USB to basic UART device


Product Information

Module Applications:
Compliance Standard:
Supported Devices:
Module Interface:
Supply Voltage Min:
Supply Voltage Max:
Product Range:
No SVHC (17-Dec-2015)

Find similar products  grouped by common attribute


  • Computers & Computer Peripherals
Related Categories

Legislation and Environmental

Country of Origin:

Country in which last significant manufacturing process was carried out

RoHS Compliant:
Tariff No:
Weight (kg):

Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.